1. Home
  2. Login
  3. View Cart
  4. Checkout

Naim Style XLR 'Pseudo' Balanced Cables

Gold Plated DIN Plug Upgrade

Gold Plated DIN Plug Upgrade

Some of the cables in this section can be upgraded to gold plated DIN plugs.
Just choose the 'Gold Plated DIN Plug Upgrade' under the cable length choice

2 x 3 Pin Female XLR - Naim Style 5 Pin Ring Locking DIN Plug 'Pseudo' Balanced Cable

2 x 3 Pin Female XLR - Naim Style 5 Pin Ring Locking DIN Plug 'Pseudo' Balanced Cable

This Flashback Sales 'Pseudo balanced' cable can be used to join the balanced output of a source fitted with a balanced output on 2 x 3 pin male XLR connectors to a Naim preamp or integrated amplifier, fitted with a 5 pin ring locking DIN input socket.

Most domestic hi-fi equipment requires un-balanced audio

For the very best results when connecting a balanced source to an un-balanced amplifier, a passive or active box should be used to convert the balanced signal to an un-balanced signal properly. The boxes can be found at any good 'pro' audio store, such as Canford Audio.

In some situations, this cable offers a low cost alternative and may help to minimise ground loops.

Suitable Naim preamps include the :-
NAC 52, 72, 82, 92, 102, 112, 202, 252, 282 or 552

The cable type is Performance Balanced.

The cable is wired XLR pin 2 - signal input in DIN, XLR pin 3 - screen of signal input in DIN. The screen of the cable runs its full length from pin 1 in the XLR but is not connected to the DIN.

This cable features a ring locking DIN plug, manufactured by Preh, as fitted to original Naim cables. The XLR connectors are from the Neutrik NC series.


Please Select Length Required From Dropdown

2 x 3 Pin Female XLR - Naim Style 5 Pin Latching DIN Plug 'Pseudo' Balanced Cable

2 x 3 Pin Female XLR - Naim Style 5 Pin Latching DIN Plug 'Pseudo' Balanced Cable

This Flashback Sales 'Pseudo balanced' cable can be used to join the balanced output of a source fitted with a balanced output on 2 x 3 pin male XLR connectors to a Naim preamp or integrated amplifier, fitted with a 5 pin latching DIN input socket.

Most domestic hi-fi equipment requires un-balanced audio

For the very best results when connecting a balanced source to an un-balanced amplifier, a passive or active box should be used to convert the balanced signal to an un-balanced signal properly. The boxes can be found at any good 'pro' audio store, such as Canford Audio.

In some situations, this cable offers a low cost alternative and may help to minimise ground loops.


Suitable Naim preamps include the :-
32, 32.5, 42 or 42.5

The cable type is Performance Balanced.

The cable is wired XLR pin 2 - signal input in DIN, XLR pin 3 - screen of signal input in DIN. The screen of the cable runs its full length from pin 1 in the XLR but is not connected to the DIN.

This cable features a latching DIN plug, manufactured by Deltron, as fitted to original Naim cables. The XLR connectors are from the Neutrik NC series.


Please Select Length Required From Dropdown

2 x 3 Pin Female XLR - Naim Style 4 Pin Ring Locking DIN Plug 'Pseudo' Balanced Cable

2 x 3 Pin Female XLR - Naim Style 4 Pin Ring Locking DIN Plug 'Pseudo' Balanced Cable

This Flashback Sales 'Pseudo balanced' cable can be used to join the balanced output of a source fitted with a balanced output on 2 x 3 pin male XLR connectors to a Naim power amp, fitted with a 4 pin ring locking DIN input socket.

Most domestic hi-fi equipment requires un-balanced audio

For the very best results when connecting a balanced source to an un-balanced amplifier, a passive or active box should be used to convert the balanced signal to an un-balanced signal properly. The boxes can be found at any good 'pro' audio store, such as Canford Audio.

In some situations, this cable offers a low cost alternative and may help to minimise ground loops.


Suitable Naim power amps include the :-
NAP 90, 100, 140, 150, 155 XS, 180, 200

The cable type is Performance Balanced.

The cable is wired XLR pin 2 - signal input in DIN, XLR pin 3 - screen of signal input in DIN. The screen of the cable runs its full length from pin 1 in the XLR but is not connected to the DIN.

This cable features a ring locking DIN plug, manufactured by Preh, as fitted to original Naim cables. The XLR connectors are from the Neutrik NC series.

The 4 pin DIN plug should not be connected to Quad equipment.


Please Select Length Required From Dropdown

2 x 3 Pin Female XLR - Naim Style 4 Pin Latching DIN Plug 'Pseudo' Balanced Cable

2 x 3 Pin Female XLR - Naim Style 4 Pin Latching DIN Plug 'Pseudo' Balanced Cable

This Flashback Sales 'Pseudo balanced' cable can be used to join the balanced output of a source fitted with a balanced output on 2 x 3 pin male XLR connectors to a Naim power amp, fitted with a 4 pin latching DIN input socket.

Most domestic hi-fi equipment requires un-balanced audio

For the very best results when connecting a balanced source to an un-balanced amplifier, a passive or active box should be used to convert the balanced signal to an un-balanced signal properly. The boxes can be found at any good 'pro' audio store, such as Canford Audio.

In some situations, this cable offers a low cost alternative and may help to minimise ground loops.


Suitable Naim power amps include the :- NAP 110

The cable type is Performance Balanced.

The cable is wired XLR pin 2 - signal input in DIN, XLR pin 3 - screen of signal input in DIN. The screen of the cable runs its full length from pin 1 in the XLR but is not connected to the DIN.

This cable features a latching DIN plug, manufactured by Deltron, as fitted to original Naim cables. The XLR connectors are from the Neutrik NC series.

The 4 pin DIN plug should not be connected to Quad equipment.


Please Select Length Required From Dropdown

2 x TRS 6.3mm Jacks - Naim Style 5 Pin Ring Locking DIN Plug 'Pseudo' Balanced Cable

2 x TRS 6.3mm Jacks - Naim Style 5 Pin Ring Locking DIN Plug 'Pseudo' Balanced Cable

This Flashback Sales 'Pseudo balanced' cable can be used to join the balanced output of a source fitted with a 2 x 6.3mm (TRS) output jack sockets to a Naim preamp or integrated amplifier, fitted with a 5 pin ring locking DIN input socket.

Most domestic hi-fi equipment requires un-balanced audio

For the very best results when connecting a balanced source to an un-balanced amplifier, a passive or active box should be used to convert the balanced signal to an un-balanced signal properly. The boxes can be found at any good 'pro' audio store, such as Canford Audio.

In some situations, this cable offers a low cost alternative and may help to minimise ground loops.


Suitable Naim preamps include the :-
NAC 52, 72, 82, 92, 102, 112, 202, 252, 282 or 552

The cable type is Performance Balanced.

The cable is wired TRS jack tip - signal input in DIN, TRS jack ring - screen of signal input in DIN. The screen of the cable runs its full length from the screen of the jack plug but is not connected to the DIN.

This cable features a ring locking DIN plug, manufactured by Preh, as fitted to original Naim cables.


Please Select Length Required From Dropdown

2 x TRS 6.3mm Jacks - Naim Style 5 Pin Latching DIN Plug 'Pseudo' Balanced Cable

2 x TRS 6.3mm Jacks - Naim Style 5 Pin Latching DIN Plug 'Pseudo' Balanced Cable

This Flashback Sales 'Pseudo balanced' cable can be used to join the balanced output of a source fitted with a 2 x 6.3mm (TRS) output jack sockets to a Naim preamp or integrated amplifier, fitted with a 5 pin latching DIN input socket.

Most domestic hi-fi equipment requires un-balanced audio

For the very best results when connecting a balanced source to an un-balanced amplifier, a passive or active box should be used to convert the balanced signal to an un-balanced signal properly. The boxes can be found at any good 'pro' audio store, such as Canford Audio.

In some situations, this cable offers a low cost alternative and may help to minimise ground loops.


Suitable Naim preamps include the :-
NAC 32, 32.5, 42 or 42.5

The cable type is Performance Balanced.

The cable is wired TRS jack tip - signal input in DIN, TRS jack ring - screen of signal input in DIN. The screen of the cable runs its full length from the screen of the jack plug but is not connected to the DIN.

This cable features a latching DIN plug, manufactured by Deltron, as fitted to original Naim cables.


Please Select Length Required From Dropdown

2 x TRS 6.3mm Jacks - Naim Style 4 Pin Ring Locking DIN Plug 'Pseudo' Balanced Cable

2 x TRS 6.3mm Jacks - Naim Style 4 Pin Ring Locking DIN Plug 'Pseudo' Balanced Cable

This Flashback Sales 'Pseudo balanced' cable can be used to join the balanced output of a source fitted with a 2 x 6.3mm (TRS) output jack sockets to a Naim power amp, fitted with a 4 pin ring locking DIN input socket.

Most domestic hi-fi equipment requires un-balanced audio

For the very best results when connecting a balanced source to an un-balanced amplifier, a passive or active box should be used to convert the balanced signal to an un-balanced signal properly. The boxes can be found at any good 'pro' audio store, such as Canford Audio.

In some situations, this cable offers a low cost alternative and may help to minimise ground loops.


Suitable Naim power amps include the :-
NAP 90, 100, 140, 150, 155 XS, 180, 200

The cable type is Performance Balanced.

The cable is wired TRS jack tip - signal input in DIN, TRS jack ring - screen of signal input in DIN. The screen of the cable runs its full length from the screen of the jack plug but is not connected to the DIN.

This cable features a ring locking DIN plug, manufactured by Preh, as fitted to original Naim cables.

The 4 pin DIN plug should not be connected to Quad equipment.


Please Select Length Required From Dropdown

2 x TRS 6.3mm Jacks - Naim Style 4 Pin Latching DIN Plug 'Pseudo' Balanced Cable

2 x TRS 6.3mm Jacks - Naim Style 4 Pin Latching DIN Plug 'Pseudo' Balanced Cable

This Flashback Sales 'Pseudo balanced' cable can be used to join the balanced output of a source fitted with a 2 x 6.3mm (TRS) output jack sockets to a Naim power amp, fitted with a 4 pin latching DIN input socket.

Most domestic hi-fi equipment requires un-balanced audio

For the very best results when connecting a balanced source to an un-balanced amplifier, a passive or active box should be used to convert the balanced signal to an un-balanced signal properly. The boxes can be found at any good 'pro' audio store, such as Canford Audio.

In some situations, this cable offers a low cost alternative and may help to minimise ground loops.


Suitable Naim power amps include the :- NAP 110

The cable type is Performance Balanced.

This cable features a latching DIN plug, manufactured by Deltron, as fitted to original Naim cables.

The cable is wired TRS jack tip - signal input in DIN, TRS jack ring - screen of signal input in DIN. The screen of the cable runs its full length from the screen of the jack plug but is not connected to the DIN.

The 4 pin DIN plug should not be connected to Quad equipment.


Please Select Length Required From Dropdown


Menu panel


Click anywhere outside this panel to close it.

Right panel

Clicking outside this panel wont close it because clickClose = false