1. Home
  2. Login
  3. View Cart
  4. Checkout

Naim Nait Integrated Pre/Power In/Out Cables

Naim Nait Pre/Power In/Out Phono/RCA Plugs Premiere Cable

Naim Nait Pre/Power In/Out Phono/RCA Plugs Premiere Cable

This cable is used to join a Naim Nait integrated amplifier to an external processor or bass management system, where the processor is fitted with Phono/RCA input and output sockets.

This cable is used in place of the 'link plug' on the rear of the integrated amp.

Suitable Naim integrated amps include:-
Nait 5, Nait XS, Nait XS2

An easy-to-follow installation diagram is included with this cable.

The Premiere cable gives a very clear, open and focused sound and customers have said its use is a very worthwhile and cost effective upgrade over other cable types.

Like all Premiere cables, it's fitted with Preh DIN plugs with damped bodies and pins and so does not have a ring lock DIN plug option. The DIN pin and body damping reduces possible interference from mechanical vibration effects. This cable can be fitted with ring lock DIN plugs upon request, but the damping feature of this type of cable will be lost.

The normal split on the phono/RCA end of this cable is 14cm approx. If the phono/RCA sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

Under no circumstances should the 4 pin DIN plug be connected to Quad equipment.

Due to the time needed to assemble Premiere interconnects, the dispatch time is 48 hours.


Please Select Length Required From Dropdown

Naim Nait Pre/Power In/Out Phono/RCA Plugs Performance Cable

Naim Nait Pre/Power In/Out Phono/RCA Plugs Performance Cable

This cable is used to join a Naim Nait integrated amplifier to an external processor or bass management system, where the processor is fitted with Phono/RCA input and output sockets.

This cable is used in place of the 'link plug' on the rear of the integrated amp.

Suitable Naim integrated amps include:-
Nait 5, Nait XS, Nait XS2

An easy-to-follow installation diagram is included with this cable.

The normal split on the phono/RCA end of this cable is 14cm approx. If the phono/RCA sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

It features Performance cable which many customers say sounds better than Naim's own grey and black SNAIC cables.

This cable features ring locking DIN plugs, manufactured by Preh as fitted to original Naim cables.

The 4 pin DIN plug should not be connected to Quad equipment.


Please Select Length Required From Dropdown

Naim Nait Pre/Power In/Out XLR Connectors Premiere Cable

Naim Nait Pre/Power In/Out XLR Connectors Premiere Cable

This cable is used to join a Naim Nait integrated amplifier to an external processor or bass management system, where the processor is fitted with balanced XLR input and output sockets.

The XLRs are wired pin 2 = signal, pin 1 = screen and pin 3 is bonded to pin 1.

You should check with your processor dealer or manufacturer to ensure that this wiring configuration is compatible with your equipment.

This cable is used in place of the 'link plug' on the rear of the integrated amp.

Suitable Naim integrated amps include:-
Nait 5, Nait XS, Nait XS2

An easy-to-follow installation diagram is included with this cable.

The Premiere cable gives a very clear, open and focused sound and customers have said its use is a very worthwhile and cost effective upgrade over other cable types.

Like all Premiere cables, it's fitted with Preh DIN plugs with damped bodies and pins and so does not have a ring lock DIN plug option. The DIN pin and body damping reduces possible interference from mechanical vibration effects. This cable can be fitted with ring lock DIN plugs upon request, but the damping feature of this type of cable will be lost.

The XLR connectors are from the Neutrik NC series.

The normal split on the XLR end of this cable is 14cm approx. If the XLR sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

Under no circumstances should the 4 pin DIN plug be connected to Quad equipment.

Due to the time needed to assemble Premiere interconnects, the dispatch time is 48 hours.


Please Select Length Required From Dropdown

Naim Nait Pre/Power In/Out XLR Connectors Performance Cable

Naim Nait Pre/Power In/Out XLR Connectors Performance Cable

This cable is used to join a Naim Nait integrated amplifier to an external processor or bass management system, where the processor is fitted with balanced XLR input and output sockets.

The XLRs are wired pin 2 = signal, pin 1 = screen and pin 3 is bonded to pin 1.

You should check with your processor dealer or manufacturer to ensure that this wiring configuration is compatible with your equipment.

This cable is used in place of the 'link plug' on the rear of the integrated amp.

Suitable Naim integrated amps include:-
Nait 5, Nait XS, Nait XS2

An easy-to-follow installation diagram is included with this cable.

The normal split on the XLR end of this cable is 14cm approx. If the XLR sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

It features Performance cable which many customers say sounds better than Naim's own grey and black SNAIC cables.

This cable features ring locking DIN plugs, manufactured by Preh as fitted to original Naim cables. The XLR connectors are from the Neutrik NC series.

The 4 pin DIN plug should not be connected to Quad equipment.


Please Select Length Required From Dropdown


Menu panel


Click anywhere outside this panel to close it.

Right panel

Clicking outside this panel wont close it because clickClose = false