1. Home
  2. Login
  3. View Cart
  4. Checkout

Lavry DA10 / M2tech DAC Cables

Gold Plated DIN Plug Upgrade

Gold Plated DIN Plug Upgrade

Some of the cables in this section can be upgraded to gold plated DIN plugs.
Just choose the 'Gold Plated DIN Plug Upgrade' under the cable length choice

2 x 3 Pin Female XLR - 5 Pin DIN Lavry or M2tech young DSD Premiere Cable

2 x 3 Pin Female XLR - 5 Pin DIN Lavry or M2tech young DSD Premiere Cable

This cable is used to join a Lavry or M2tech young DSD DAC or any other equipment fitted with male XLR output sockets, to a preamp or integrated amplifier, fitted with a 5 pin DIN input socket.

Both XLRs are wired as follows :-
Pin 3 in the XLR is not connected
pin 2 is connected to the signal input of the amp
and pin 1 is connected to the screen of the amp

You should consult the User Manual for the XLR fitted equipment to check the suitability of this cable and if applicable, how to make any adjustments necessary before using this cable.

This Flashback Sales Premiere cable, customers say gives a very open and focused sound and can be a very cost-effective upgrade.

Like all our Premiere cables, it features damped DIN bodies and pins and so does not have a ring lock or latching DIN plug option. The DIN pin and body damping reduces possible interference from mechanical vibration effects. This cable can be fitted with ring lock or latching DIN plugs upon request, but the damping feature of this type of cable will be lost.

The normal split on the XLR end of this cable is 14cm approx. If the XLR sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

This cable features a DIN plug, manufactured by Preh, as fitted to original Naim cables. The XLR connectors are from the Neutrik NC series.

Due to the time needed to assemble Premiere interconnects, the dispatch time is 48 hours.


Please Select Length Required From Dropdown

2 x 3 Pin Female XLR - 5 Pin DIN Plug Lavry or M2tech young DSD DAC Performance Cable

2 x 3 Pin Female XLR - 5 Pin DIN Plug Lavry or M2tech young DSD DAC Performance Cable

This cable is used to join a Lavry or M2tech young DSD DAC or any other equipment fitted with male XLR output sockets, to a preamp or integrated amplifier, fitted with a 5 pin DIN input socket.

Suitable Quad preamps are :-
33, 34 or 44

Both XLRs are wired as follows:-
Pin 3 in the XLR is not connected
pin 2 is connected to the signal input of the amp
and pin 1 is connected to the screen of the amp

You should consult the User Manual for the XLR fitted equipment to check the suitability of this cable and if applicable, how to make any adjustments necessary before using this cable.

This Flashback Sales Performance cable, customers say gives a clear and detailed sound.

The normal split on the XLR end of this cable is 14cm approx. If the XLR sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

This cable features a DIN plug, manufactured by Preh, as fitted to original Naim cables. The XLR connectors are from the Neutrik NC series.


Please Select Length Required From Dropdown

2 x 3 Pin Female XLR - Naim Style 5 Pin Ring Locking DIN Plug Lavry or M2tech young DSD DAC Performance Cable

2 x 3 Pin Female XLR - Naim Style 5 Pin Ring Locking DIN Plug Lavry or M2tech young DSD DAC Performance Cable

This cable is used to join a Lavry or M2tech young DSD DAC or any other equipment fitted with male XLR output sockets, to a Naim preamp or integrated amplifier, fitted with a 5 pin ring locking DIN input socket.

Suitable Naim preamps include the :-
NAC 52, 72, 82, 92, 102, 112, 202 252, 282 and 552

Both XLRs are wired as follows :-
Pin 3 in the XLR is not connected
pin 2 is connected to the signal input of the amp
and pin 1 is connected to the screen of the amp

You should consult the User Manual for the XLR fitted equipment to check the suitability of this cable and if applicable, how to make any adjustments necessary before using this cable.

This Flashback Sales Performance cable, customers say gives a clear and detailed sound, as good as or better than Naim's own black SNAIC cables.

The normal split on the XLR end of this cable is 14cm approx. If the XLR sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

This cable features a ring locking DIN plug, manufactured by Preh, as fitted to original Naim cables. The XLR connectors are from the Neutrik NC series.


Please Select Length Required From Dropdown

2 x 3 Pin Female XLR - Naim Style 5 Pin Latching DIN Plug Lavry or M2tech young DSD DAC Performance Cable

2 x 3 Pin Female XLR - Naim Style 5 Pin Latching DIN Plug Lavry or M2tech young DSD DAC Performance Cable

This cable is used to join a Lavry or M2tech young DSD DAC or any other equipment fitted with male XLR output sockets, to a Naim preamp or integrated amplifier, fitted with a 5 pin ring locking DIN input socket.

Suitable Naim preamps include the :-
NAC 32, 32.5, 42 or 42.5

Both XLRs are wired as follows :-
Pin 3 in the XLR is not connected
pin 2 is connected to the signal input of the amp
and pin 1 is connected to the screen of the amp

You should consult the User Manual for the XLR fitted equipment to check the suitability of this cable and if applicable, how to make any adjustments necessary before using this cable.

This Flashback Sales Performance cable, customers say gives a clear and detailed sound, as good as or better than Naim's own black SNAIC cables.

The normal split on the XLR end of this cable is 14cm approx. If the XLR sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

This cable features a latching DIN plug, manufactured by Deltron, as fitted to original Naim cables. The XLR connectors are from the Neutrik NC series.


Please Select Length Required From Dropdown

2 x 3 Pin Female XLR - 2 x Phono/RCA Lavry or M2tech young DSD Premiere Cable

2 x 3 Pin Female XLR - 2 x Phono/RCA Lavry or M2tech young DSD Premiere Cable

This cable is used to join a Lavry or M2tech young DSD DAC or any other equipment fitted with male XLR output sockets, to a preamp, integrated amplifier or power amp, fitted with 2 x phono/RCA input sockets.

Both XLRs are wired as follows :-
Pin 3 in the XLR is not connected
pin 2 is connected to the signal input of the amp
and pin 1 is connected to the screen of the amp

You should consult the User Manual for the XLR fitted equipment to check the suitability of this cable and if applicable, how to make any adjustments necessary before using this cable.

This Flashback Sales Premiere cable, customers say gives a very open and focused sound and can be a very cost-effective upgrade.

The normal split on the XLR end of this cable is 14cm approx. If the XLR sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

The XLR connectors are from the Neutrik NC series.


Please Select Length Required From Dropdown

2 x 3 Pin Female XLR - 2 x Phono/RCA Plugs Lavry or M2tech young DSD DAC Performance Cable

2 x 3 Pin Female XLR - 2 x Phono/RCA Plugs Lavry or M2tech young DSD DAC Performance Cable

This cable is used to join a Lavry or M2tech young DSD DAC or any other equipment fitted with male XLR output sockets, to a preamp, integrated amplifier or power amp, fitted with 2 x phono/RCA input sockets.

Both XLRs are wired as follows :-
Pin 3 in the XLR is not connected
pin 2 is connected to the signal input of the amp
and pin 1 is connected to the screen of the amp

You should consult the User Manual for the XLR fitted equipment to check the suitability of this cable and if applicable, how to make any adjustments necessary before using this cable.

This Flashback Sales Performance cable, customers say gives a clear and detailed sound.

The normal split on the XLR end of this cable is 14cm approx. If the XLR sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

The XLR connectors are from the Neutrik NC series.


Please Select Length Required From Dropdown

2 x 3 Pin Female XLR - Naim Style 4 Pin DIN Plug Lavry or M2tech young DSD Premiere Cable

2 x 3 Pin Female XLR - Naim Style 4 Pin DIN Plug Lavry or M2tech young DSD Premiere Cable

This cable is used to join a Lavry or M2tech young DSD DAC or any other equipment fitted with male XLR output sockets, to any Naim power amplifier, fitted with a 4 pin DIN input socket.

Both XLRs are wired as follows :-
Pin 3 in the XLR is not connected
pin 2 is connected to the signal input of the amp
and pin 1 is connected to the screen of the amp

You should consult the User Manual for the XLR fitted equipment to check the suitability of this cable and if applicable, how to make any adjustments necessary before using this cable.

This Flashback Sales Premiere cable, customers say gives a very open and focused sound and can be a very cost-effective upgrade.

Like all our Premiere cables, it features damped DIN bodies and pins and so does not have a ring lock or latching DIN plug option. The DIN pin and body damping reduces possible interference from mechanical vibration effects. This cable can be fitted with ring lock or latching DIN plugs upon request, but the damping feature of this type of cable will be lost.

The normal split on the XLR end of this cable is 14cm approx. If the XLR sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

This cable features a DIN plug, manufactured by Preh, as fitted to original Naim cables. The XLR connectors are from the Neutrik NC series.

Please note - the 4 pin DIN must not be connected to Quad equipment

Due to the time needed to assemble Premiere interconnects, the dispatch time is 48 hours.


Please Select Length Required From Dropdown

2 x 3 Pin Female XLR - Quad 4 Pin DIN Plug Lavry or M2tech young DSD Premiere Cable

2 x 3 Pin Female XLR - Quad 4 Pin DIN Plug Lavry or M2tech young DSD Premiere Cable

This cable is used to join a Lavry or M2tech young DSD DAC or any other equipment fitted with male XLR output sockets, to any Quad power amplifier, fitted with a 4 pin DIN input socket.

Suitable Quad amps are :-
303, 405 or 405-2

Both XLRs are wired as follows :-
Pin 3 in the XLR is not connected
pin 2 is connected to the signal input of the amp
and pin 1 is connected to the screen of the amp

You should consult the User Manual for the XLR fitted equipment to check the suitability of this cable and if applicable, how to make any adjustments necessary before using this cable.

This Flashback Sales Premiere cable, customers say gives a very open and focused sound and can be a very cost-effective upgrade.

Like all our Premiere cables, it features damped DIN bodies and pins. The DIN pin and body damping reduces possible interference from mechanical vibration effects.

The normal split on the XLR end of this cable is 14cm approx. If the XLR sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

This cable features a DIN plug, manufactured by Preh, as fitted to original Naim cables. The XLR connectors are from the Neutrik NC series.

Please note - the 4 pin DIN must not be connected to Naim equipment

Due to the time needed to assemble Premiere interconnects, the dispatch time is 48 hours.


Please Select Length Required From Dropdown

2 x 3 Pin Female XLR - Naim Style 3 Pin Male XLR Lavry or M2tech young DSD Premiere Cable

2 x 3 Pin Female XLR - Naim Style 3 Pin Male XLR Lavry or M2tech young DSD Premiere Cable

This cable is used to join a Lavry or M2tech young DSD DAC or any other equipment fitted with male XLR output sockets, to a Naim NAP 250, fitted with a 3 pin female XLR nput socket.

Both female XLRs are wired as follows :-
Pin 3 in the XLR is not connected
pin 2 is connected to the signal input of the amp
and pin 1 is connected to the screen of the amp

You should consult the User Manual for the XLR fitted equipment to check the suitability of this cable and if applicable, how to make any adjustments necessary before using this cable.

This Flashback Sales Premiere cable, customers say gives a very open and focused sound and can be a very cost-effective upgrade.

The normal split on the XLR end of this cable is 14cm approx. If the XLR sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.

The XLR connectors are from the Neutrik NC series.

Please note - the 4 pin DIN must not be connected to Naim equipment


Please Select Length Required From Dropdown


Menu panel


Click anywhere outside this panel to close it.

Right panel

Clicking outside this panel wont close it because clickClose = false