This high quality Premiere cable can be used to join any make of preamp output fitted with phono/RCA sockets to any Naim power amplifier fitted with a 4 pin DIN input socket - or - it can be used to join the 4 pin DIN output of any Naim or TeddyPardo power supply or Naim preamp to any make of power amplifier, fitted with phono/RCA input sockets.
Suitable Naim preamps include the :-
NAC 32.5, 42.5, 72, 82, 92, 102, 112, 202, 282, 552, N 172 XS or N 272
Suitable Naim power amps include the :-
NAP 90, 100, 110, 140, 150, 155 XS, V175, 180, 200 or 6-50
Power supplies include the :-
HiCap, SuperCap, FlatCap 2 or FlatCap XS
If this cable is used to join a Naim preamp to a non-Naim power amp, the preamp must be connected to a suitable power supply.
The Premiere cable gives a very clear, open and focused sound and customers have said its use is a very worthwhile and cost effective upgrade over other cable types.
Like all Premiere cables, it's fitted with a Preh DIN plug with a damped body and pins and so does not have a ring lock or latching DIN plug option. The DIN pin and body damping reduces possible interference from mechanical vibration effects. This cable can be fitted with ring lock or latching DIN plugs upon request, but the damping feature of this type of cable will be lost.
The normal split on the phono/RCA end of this cable is 14cm approx. If the phono/RCA sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.
Under no circumstances should the 4 pin DIN plug be connected to Quad equipment.
Due to the time needed to assemble Premiere interconnects, the dispatch time is 48 hours.