This cable is used to join a Lavry or M2tech young DSD DAC or any other equipment fitted with male XLR output sockets, to any Quad power amplifier, fitted with a 4 pin DIN input socket.
Suitable Quad amps are :-
303, 405 or 405-2
Both XLRs are wired as follows :-
Pin 3 in the XLR is not connected
pin 2 is connected to the signal input of the amp
and pin 1 is connected to the screen of the amp
You should consult the User Manual for the XLR fitted equipment to check the suitability of this cable and if applicable, how to make any adjustments necessary before using this cable.
This Flashback Sales Premiere cable, customers say gives a very open and focused sound and can be a very cost-effective upgrade.
Like all our Premiere cables, it features damped DIN bodies and pins. The DIN pin and body damping reduces possible interference from mechanical vibration effects.
The normal split on the XLR end of this cable is 14cm approx. If the XLR sockets are widely spaced on your equipment, then a 25cm approx. split can be selected by choosing the 'Long Split' option below the 'Cable Length' dropdown.
This cable features a DIN plug, manufactured by Preh, as fitted to original Naim cables. The XLR connectors are from the Neutrik NC series.
Please note - the 4 pin DIN must not be connected to Naim equipment
Due to the time needed to assemble Premiere interconnects, the dispatch time is 48 hours.