On-Line Shop
 

Product Sections


Main Pages




Premiere Cables for NAIM

On-Line Shop > Premiere Interconnects > Premiere Cables for NAIM
Premiere NAIM 4 Pin DIN - 3 Pin Male XLRPremiere NAIM 4 Pin DIN - 3 Pin Male XLR

This cable can be used to join a Naim pre-amp, fitted with a 4 pin DIN
output socket to a Naim power amp fitted with a single 3 pin female XLR
input socket

Under no circumstances should the 4 pin DIN be connected
to Quad equipment

Due to the time needed to assemble Premiere interconnects,
the dispatch time is 48 hours

Please click on picture to enlarge

Please Select Cable Colour Required From Dropdown

Please Select Length Required From Dropdown


GOLD Plated DIN Plug Upgrade + £15



Premiere 4 Pin DIN - 4 Pin DIN Naim CablePremiere 4 Pin DIN - 4 Pin DIN Naim Cable

This Performance Premiere cable is also known as a SNAIC 4 type - Audio Only.
It can be used to join a Naim pre-amp to a Naim power amp, where the power amp
is fitted with a 4 pin DIN input socket.

Since it carries no power connection, the system must contain a power supply
and the power supply should be connected to the pre-amp,
using a power only SNAIC 5, that can be found below

This cable is not suitable for use with Quad equipment

Due to the time needed to assemble Premiere interconnects,
the dispatch time is 48 hours

Please click on picture to enlarge

Please Select Cable Colour Required From Dropdown

Please Select Length Required From Dropdown


GOLD Plated DIN Plugs Upgrade + £29



Premiere NAIM 4 Pin DIN - 2 Phono / RCA Plugs CablePremiere NAIM 4 Pin DIN - 2 Phono / RCA Plugs Cable

This can can be used to connect the 4 pin DIN output socket of a
Naim pre-amp to a power amp fitted with phono/RCA input sockets

- or - a pre-amp fitted with 2 phono/RCA output sockets to a Naim
power amp fitted with a 4 pin DIN input socket

Under no circumstances, should the 4 pin DIN be connected to Quad equipment

Please note - if the cable is used with a Naim pre-amp, a Naim power supply is needed in order to power the pre-amp

Due to the time needed to assemble Premiere interconnects,
the dispatch time is 48 hours

Please click on picture to enlarge

Please Select Cable Colour Required From Dropdown

Please Select Length Required From Dropdown


GOLD Plated DIN Plug Upgrade + £15



Premiere 180° 5 Pin DIN - 5 Pin DIN CablePremiere 180° 5 Pin DIN - 5 Pin DIN Cable

This cable can be used to join any source such as a CD player
or tuner fitted with a 5 pin DIN input socket to any amplifier
with a 5 pin DIN input socket

Because of the style of the DIN plugs, this cable can be freely
used with Quad, Naim, A&R and many other fine Hi-fi manufacturers

Due to the time needed to assemble Premiere interconnects,
the dispatch time is 48 hours

Click on picture to enlarge

Please Select Cable Colour Required From Dropdown

Please Select Length Required From Dropdown


GOLD Plated DIN Plugs Upgrade + £29



SNAIC 5 POWER ONLY Performance Cable With Ring Locking DIN Plug ConnectorsSNAIC 5 POWER ONLY Performance Cable With Ring Locking DIN Plug Connectors

This is a 240° degree 5 pin DIN - 5 pin DIN plugs cable with ring locking DINs

It is used to join a Naim Pre-Amp to a Naim Power-Amp
(FOR POWER ONLY)

This cable should be used in conjunction with the
Avondale Audio SNAIC 4 Upgrade cables in this section

Click on picture to enlarge

Please Select Length Required From Dropdown



Premiere 5 Pin DIN - 2 Phono / RCA Plugs CablePremiere 5 Pin DIN - 2 Phono / RCA Plugs Cable

This cable can be used to join a modern source such as a CD player or tuner,
fitted with phono/RCA output sockets to an amplifier fitted with
a 5 pin DIN input socket, such as Quad, Naim, A&R and B&O

- or - to join a classic source such as a tuner or CD player or tape recorder,
fitted with a 5 pin DIN output socket to a modern pre-amp fitted with
phono/RCA input sockets

Please note - this cable cannot be used to join a Headphone Amp to a amplifier fitted
with a 5 pin DIN output socket. A suitable cable is below

Due to the time needed to assemble Premiere interconnects,
the dispatch time is 48 hours

Please click on picture to enlarge

Please Select Cable Colour Required From Dropdown

Please Select Length Required From Dropdown


GOLD Plated DIN Plug Upgrade + £15



Premiere  5 Pin DIN - 4 Phono / RCA Plugs CablePremiere 5 Pin DIN - 4 Phono / RCA Plugs Cable

To connect a tape deck, mini-disc or computer fitted with 4 phono/RCA sockets
for record and replay to a Naim, Quad or any pre-amp fitted with a 5 pin DIN tape socket

2 of these cables are needed to join a DVD Player with 5.1 or 7.1 audio output to a
Naim AV2 processor

Click on picture to enlarge

Cable Colour
Orange   
Black   

Please Select Length Required From Dropdown


GOLD Plated DIN Plug Upgrade + £15



Premiere HEADPHONE AMPLIFIER 5 Pin DIN - 2 Phono / RCA Plugs CablePremiere HEADPHONE AMPLIFIER 5 Pin DIN - 2 Phono / RCA Plugs Cable

This cable can be used to join a classic amplifier fitted with
a 5 pin DIN tape output socket to a Headphone Amp
or Stax Electrostatic Headphone Unit

It CANNOT be used to join a source to an amp

Due to the time needed to assemble Premiere interconnects,
the dispatch time is 48 hours

Please click on picture to enlarge

Please Select Cable Colour Required From Dropdown

Please Select Length Required From Dropdown


GOLD Plated DIN Plug Upgrade + £15



Premiere 4 Pin DIN - 5 Pin DIN CablePremiere 4 Pin DIN - 5 Pin DIN Cable

This cable is used to join certain Naim equipment, eg a Flatcap 2
to a pre-amp, where the Flatcap 2 is powering a StageLine

Due to the time needed to assemble Premiere interconnects,
the dispatch time is 48 hours

Please click on picture to enlarge

Please Select Cable Colour Required From Dropdown

Please Select Length Required From Dropdown


GOLD Plated DIN Plugs Upgrade + £29



On-Line Shop | Premiere Interconnects |  Premiere Cables for NAIM