Phono/RCA Plug Bi-amp Cables

On-Line Shop > Quad, A&R, Leak, B&O etc Audio Cables > Bi-Amping DIN / Phono (RCA) Cables
> Phono/RCA Plug Bi-amp Cables

As supplied, these cables all supply each power amp with stereo, that is 1x left and 1x right. They should be used as follows - 1 power amp should be designated the bass amp, the other amp should be designated the treble amp. Assuming that you have bi-wirable loudspeakers, remove the connections or bus bars on the loudspeakers to separate the terminals.
Connect the bass amp left to the left hand bass terminals on the speaker. Take the right hand output from the bass amp and connect it to the bass terminals on the right hand speaker. Then do the same with the treble amp, but of course, connecting to the treble terminals on the loudspeakers

If you require the bi-amp cables wired the opposite way, that is 1 amp receives 2x left audio and the other amp 2x right audio, please get in touch before placing your order. There's no extra charge for this alternative configuration

2 Phono Plugs - 2 x 2 Phono Plugs Performance Cable

For connecting a Pre-Amp fitted with Phono output sockets
to 2 Power Amplifiers, both fitted with Phono input sockets.

The cable type is Performance

Click on picture to enlarge

Please Select Length Required From Dropdown

2 Phono Plugs - 2 x 2 Phono Plugs

For connecting a Pre-Amp fitted with Phono output sockets
to 2 Power Amplifiers, both fitted with Phono input sockets.

The cable type is EHG

Click on picture to enlarge

Please Select Length Required From Dropdown

On-Line Shop | Quad, A&R, Leak, B&O etc Audio Cables | Bi-Amping DIN / Phono (RCA) Cables
| Phono/RCA Plug Bi-amp Cables

Shopping Cart

Phono/RCA Plug Bi-amp Cables